Due to the large market demand for wire cutting machine tools, the quality of wire cutting machine tools on the market is also mixed. The wire cutting machine tool is the last process in the mold processing, and it is also an important step, so the processing accuracy must meet the requirement...... [Read More]

The principle of micro-EDM is not fundamentally different from that of ordinary EDM. The surface quality of its machining mainly depends on the size and depth of the etch pits, that is, the energy of a single discharge pulse; and its machining accuracy is closely related to factors such as the...... [Read More]

After using the radial drilling machine for a period of time, some minor faults may occur, which will cause the drilling machine to be unable to operate normally and delay the normal production, and point out some common faults and maintenance solutions during the use of the drilling machine. ...... [Read More]

Centerless grinder is one of the important equipments widely used in cylindrical grinding in machining. The original feed is manual, that is, the handle is shaken manually. Poor accuracy and low efficiency. Today’s centerless grinder has high production efficiency, and it is easier to re...... [Read More]

The technical requirements of the bench drill spindle sleeve are mainly divided into two parts, namely, the design principle of the external shape and size and the technical requirements for the selection of part materials. The material selection of the spindle sleeve of the drilling machine a...... [Read More]

1. Different processing functions 1）. Gantry milling machine: Multiple milling cutters can be used on the gantry milling machine to process the surface at the same time, and the machining accuracy and production efficiency are relatively high. 2）. Gantry machining centers: there are fixed be...... [Read More]

All models of Antsmachine spark machines are installed and equipped with light-sensing and temperature-sensing alarm reminder devices. If the temperature exceeds the limit or the red light and warm light exceeds the limit, these alarm functions will be triggered, and the automatic fire extingu...... [Read More]

As the most common and most used machine in the market, the daily maintenance of the machining center is very necessary. At present, in the production of this model in China, the process technology is similar. Here are some common fault analysis of vertical machining centers. 1. The spindle t...... [Read More]

Compare machine layouts The two guide rails of the flatbed CNC lathe are parallel to the ground plane. The planes of the two guide rails intersect with the plane of the ground to form an inclined plane with angles of 30°, 45°, 60° and 75°. From the side of the machine tool, the flat bed CNC l...... [Read More]

Usually, the rotation of the boring tool is the main movement, and the movement of the boring tool or workpiece is the feed movement.It is mainly used for machining high-precision holes or positioning multiple holes at once to complete the finishing, in addition, it can also be engaged in othe...... [Read More]