T30 Mechanical CNC Turret Punch Press
Max. Sheet Thickness: 4mm
Max. Hole Diameter: Φ88.9mm
No installation required
Simple operation
Support video teaching
1 Year for machinery warranty
On Stock
Email : contact@antsmachine.com
(your request will be responsed within 1 hour.)
Technical Parameter :
Name | Specification | Unit | |
Press Capacity | 30 | T | |
Frame Construction | O-Frame | ||
Max. Sheet Size | Y axis(with one reposition) | 1000 | mm |
X axis | 1000 | ||
Max. Sheet Thickness | 4 | mm | |
Max. Hole Diameter | Φ88.9 | mm | |
Stroke | 40 | mm | |
Max. Hit Rate | 220 (30mm pitch) | hpm | |
Max. Feed Rate | 80 | m/min | |
Clamps No. | 2 | pcs | |
Re-positioning Cylinder | 2 | set | |
No. of Stations | 8 | pcs | |
Turret Rotating Speed | 30 | rpm | |
Turret Positioning | Double cylinder positioning | ||
Air Pressure | 0.6 | mpa | |
Die Form | Mosaic turret, Long guide tool | ||
Punching Accuracy | ±0.10 | mm | |
No. of Controlling Axis | 3(X/Y/T)/ | pcs | |
Total Power | 14/15 | kw | |
Overall Size | 3000*2000*2100 | mm |
T30 Mechanical CNC Turret Punch Press Product Introduction :
Stamping body
The body adopt integrated fuselage, widened design, disposable welding, tempering, disposable forming.
Seamless Worktable
Seamless worktable design, brush & steel ball combined, when the plate moved, it can avoid the plate and the worktable make a collision, guide rail, ball screw dust-proof protection.
Folding Worktable
Side assist platform adopt cylinder control seamless design, convenient for change the tooling.
Turret Structure:
The turret is made of 40Cr, completed in large processing center.
Clamp
With clamp automatic avoid collision function, can make no dead area for punching on sheet.
System
The system can automatically search, to select the most suitable tool to processing, and display stamping time, processing capacity, die life (punches), etc.
Auto-index
The rotating station is a unique worm gear structure.
Beam
Carriage and beam integrated design, accurate positioning, moving more smoothly, to eliminate the X, Y-axis dynamic offset case.
Name | Model | Supplier |
Line Guider | MSA35/HGW35 | Taiwan PMI/HIWIN |
Ball Screw | SFSR04040BIDG | Taiwan PMI/TBI |
Controller Unit | DADONG CNC&ADVANTECH/AXIOMTEK | |
Servo Motor/Motor Driver | Japan Panasonic/Fuji | |
Single Valve | Japan Azbil | |
Coupling | Germany Mayr | |
Reduction Gears | LPF120/KPX142 | Taiwan VGM / KOFON |
Electromagnetic Valve | 4V220-08BDC24V | Taiwan Airtac |
Magnet Switch | CS1B2020 | |
Air Cylinder | ACQ50x40•S | |
Power Module | S8FS-C15024 | Japan OMRON |
Clutch | KB-200-1 | Italy OMPI |
Breaker | 32A | France Schneider |
Contactor | LC1N3201M5N | |
Approach Switch | RN04-N | Taiwan RIKO |
Link Chain | Japan Tsubaki | |
Bearing | Germany KRW | |
Auto-index timing belt | 3200-8M | Germany Continental |
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.