A good mechanical equipment process engineer, must be a good application engineer, production equipment of mechanical manufacturing various types of production equipment, production processing and application field, structure characteristics, machining accuracy is very accurate and adequate gr...... [Read More]

1, High flexibility and process compound moving table CNC longmen milling machine has the characteristics of flexibility (variability) high and process compound. The so-called “flexible” is flexible, universal and can adapt to the processing of different shapes of the workpiece aut...... [Read More]

CNC milling machine also called Computer Numerical Control milling machine. It is a milling machine controlled by digital signal of electronic meter. CNC milling machine is an automatic processing equipment developed on the basis of general milling machine. The processing technology of the tw...... [Read More]

At present, the common locking mechanism of turning and milling machine tools is a three-tooth disc. Because the three-ring structure is positioned in the axial and radial directions at the same time, six degrees of freedom are limited, while the original spindle has limited five degrees of fr...... [Read More]

1.The dangers of excessive temperature of the band sawing machine motor （1）The overheating of the motor of the band sawing machine is very detrimental to the insulation of the motor, which will accelerate the aging of the insulation and shorten the service life of the motor （2）Various acci...... [Read More]

Circular sawing machines can be divided into metal circular sawing machines and woodworking circular sawing machines according to the processed products. According to the feeding method, it is divided into vertical, horizontal and scissors. According to the control method, it can be divided in...... [Read More]

First, Adjust the distance between the blade and the grinding wheel, then adjust the regulating wheel to about the diameter of the workpiece, place the workpiece between the regulating wheel and the grinding wheel, then slowly put the regulating wheel to make the regulating wheel slightly clam...... [Read More]

1. ANTISHI VMC machining center DC spindle drive system The DC spindle drive mostly adopts the thyristor speed regulation method. The DC feed servo system is a double-loop control system composed of a speed loop and a current loop to control the armature voltage of the DC spindle motor. The pi...... [Read More]

The main shaft of the CNC horizontal milling machine is arranged horizontally and is parallel to the machine tool table. In order to expand the processing range and use functions, 4-5 axis machining is usually achieved by adding a CNC turntable or a universal CNC turntable. In this way, not on...... [Read More]

1. The compact structure does not take up too much space One of the characteristics that a turret lathe should have is that it has a compact structure and does not occupy a lot of space. Many people may sneer after reading this, thinking that since it is a lathe, its area should not be limited...... [Read More]