FIND THE RIGHT MACHINE FOR YOU
Reported by: ANTISHICNC Date: November 16, 2021
Main performance characteristics of steel bar sawing machine: 1. Very sturdy two-column cast iron structure with heavy-duty rotating console. 2. Three cutting speeds-directly converted by the main drive motor. 3. Infinitely variable saw frame feed. 4. The horizontal saw frame can be rotated 45...... [Read More]
Reported by: ANTISHICNC Date: November 12, 2021
The operation steps of the milling machine are as follows: 1. Turn on the power switch of the milling machine; turn the forward and reverse switch to the (for) position for forward rotation; 2. Adjust the verticality of the milling machine’s spindle and the parallelism of the vise, and ...... [Read More]
Reported by: ANTISHICNC Date:
1. Installation of CNC milling machine: The general CNC milling machine is a mechatronics design. From the factory to the user, it is shipped as a whole machine without disassembly and packaging. Therefore, after receiving the machine tool, the user only needs to follow the instructions in th...... [Read More]
Reported by: ANTISHICNC Date:
At present, under the technological development and progress of turret milling machines, many manufacturing industries can use turret milling machines to process and produce workpieces. At the same time, turret milling machines continue to be improved in space structure technology and technolo...... [Read More]
Reported by: ANTISHICNC Date: November 9, 2021
1 Pay attention to mechanical risks and reduce mechanical damage A radial drilling machine is a drilling machine in which the rocker arm can rotate and lift around the column, and the headstock is usually moved horizontally on the rocker arm. It can also be called a radial drill, which is a k...... [Read More]
Reported by: ANTISHICNC Date:
The reason why the surface of the workpiece processed by the cylindrical grinder has spiral lines is mainly due to the excessive straightness of the generatrix of the grinding wheel and unevenness, so that the grinding wheel and the workpiece surface are only partly in contact during grinding....... [Read More]
Reported by: ANTISHICNC Date:
The method for the center height of the CNC lathe is as follows: (1) Turn the end face first; (2) Generally, there are two situations where the spindle is higher than the tool and the spindle is lower than the tool; If the end face is turned, the center residue is a cone-shaped residue, indic...... [Read More]
Reported by: ANTISHICNC Date:
1. Reduce the working weight of the part that causes vibration, the smaller the inertia, the better. Improve the rigidity of the processing system, such as using a tool holder with a higher elastic coefficient or using a special anti-vibration force added with a dynamic shock absorber to absor...... [Read More]
Reported by: ANTISHICNC Date:
1. Observe whether the motor machinery is damaged and whether the connection is normal. When the winding is short-circuited, the motor will spark and smoke. Then check the insulation of the junction box circuit and whether the screws are fastened or not, and clean up the dust and oil. 2. By s...... [Read More]
Reported by: ANTISHICNC Date: November 8, 2021
What is the reason for the uneven profile sawn by the finished sawing machine? The finished sawing machine is generally used on the extrusion line. The extruded profile is generally cut into a section of 2-3 meters according to customer requirements, and the length is 6 meters. The function of...... [Read More]
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.