1.Shearing machine in the use of the process should pay attention to matters:
1)Start the shearer machine for a number of cycles of idling, to ensure that under normal circumstances, test shear different thicknesses of plate, from thin to thick. Ensure that the user is familiar with the performance of the shearer.
2) Must be adjusted to different blade gap when test shear different plate thickness. If not adjusted to the corresponding blade gap, the impact of blade durability.
3) Shear in the shearing process open the pressure gauge switch, observe the oil pressure value, shear 12mm plate pressure should be less than 20MPa. This remote regulator No9, factory pressure set 20-22MPa, the user must comply with the provisions of this regulation, shall not be sheared more than the specified material surface to increase the pressure, resulting in damage to the machine.
4) Prohibit the method of knocking to loosen or tighten the blocking device or adjust the blade gap.
5) Operation sound balance. If the shearer has a murmur, it should be stopped and inspected.
6) Shearer operation when the oil tank to raise the temperature <60 degrees, more than when the machine is shut down to rest.
2.Methods of maintenance of shearing machine:
1) Operate in strict accordance with the operation regulations.
2) Before each start-up according to the requirements of the lubrication chart timed, fixed-point, quantitative lubricant, the oil should be clean and no precipitation.
3) The machine tool must often keep clean, unpainted part of the anti-rust grease.
4) Lubricating oil in the motor bearings should be regularly replaced and refilled, and often check whether the electrical part of the work is normal, safe and reliable.
5) Regularly check whether the triangle belt, handle, knob, key is damaged, serious wear and tear should be replaced in a timely manner, and report the spare parts to replenish.
6) Regularly check and repair the switch, insurance, handle, to ensure that it works reliably.
7) Lubricate the machine and clean the machine before the end of each day.
8) It is strictly prohibited for non-designated personnel to operate the equipment, and the machine must be stopped when the person leaves the machine.
Shanghai ANTS Machine Equipment Co., Ltd. provide a variety of shearing machines, support customized services. If necessary, please feel free to consult our technical staff.
Keywords: Shearing machine, gate type shearing machine, metal plate shearing machine, mechanical shearing machine
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.