technology news

How to deal with saw skew on metal band sawing machine?

Whether the sawing workpiece is leveled when the metal band sawing machine is working.

Set whether the distance between the guide arm of the sawing machine and the workpiece is too large.

Check whether the band saw blade is dull and needs to be replaced.
Check whether the gap between the alloy block of the saw blade and the saw blade on the metal band saw is too large.

Check whether the workpiece of the metal band sawing machine is too hard, whether the sawing is too fast, and whether the feed amount should be reduced.

Check whether the saw blade on the sawing machine is tensioned.

If there is no problem with the above, then check whether the guide bearing on the metal metal band saw is seriously worn. If the wear is serious, replace it. If the replacement fails, adjust the saw blade clamping mechanism on both sides of the guide arm to make the saw blade and the lower working surface of the clamping vise. It is enough to be vertical and parallel to the fixing surface of the clamping vise.

If you want to know more about ANTS, please visit our official website.

Our website:http://www.antsmachine.com

If you have any other questions, please contact us directly by email.

Our email: Contact@antsmachine.com

Get The Required Product Quotation As Quickly As Possible

If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.

have any queries? Send to contact@antsmachine.com

Contact Us