The milling machine completes the metal forming by rotating the tool and moving along the axis on the workpiece. Obviously, the position of milling machine in machining is very important. Although the milling machine is primarily used to machine flat and square surfaces, it also has many other...... [Read More]

The hydraulic radial arm drilling machine has high working efficiency, high hydraulic pressure, small machining error and preselected variable speed. It can be bored under the condition of corresponding tooling. The spindle box, rocker arm, and column are all clamped by hydraulic pressure; Use...... [Read More]

The hydraulic transmission system of the metal band saw consists of a hydraulic circuit composed of pumps, valves, cylinders, tanks, pipelines and other auxiliary parts. The lifting of the saw beam and the clamping of the workpiece are completed under electrical control. Through the speed cont...... [Read More]

1. Daily maintenance of ordinary lathes The daily maintenance of the lathe can keep its accuracy as new Before class: 1. Wipe the dust on the exposed guideway surface and sliding surface of the machine tool and add oil; 2. Lubricate all parts according to regulations; 3. Check the position of ...... [Read More]

Tungsten carbide cemented carbide has high hardness and excellent wear resistance, and is widely used in drills, tools, molds, needles, knives and other industries that require wear resistance and special processing. For grinding tungsten carbide cemented carbide, you can choose: 39C grinding ...... [Read More]

Vertical Machining Center Vertical machining center refers to a machining center with a vertical spindle. Its structure is mostly a fixed column. The worktable is rectangular and has no indexing and rotation function. It is suitable for processing discs, sleeves, and plate parts. It generally...... [Read More]

High manganese steel Steel with a manganese content of 11% to 18% is called high manganese steel. The chemical composition of commonly used cast high manganese steel ZMn13 is: Mn content is 11% to 14%, C content is 1% to 1.4%, Si content is 0.3% to 1%, P content is less than 0.03%, and S cont...... [Read More]

The blanking of thin-walled pipes can be processed by sawing. Since the sawing incision is very narrow (compared to the grinding wheel, it reduces material loss by 60%), and it can be automatically sawed in bundles, so sawing is used. The processing method is an economical and high-efficiency ...... [Read More]

When using a band saw to cut H steel, I-beam, angle steel and channel steel, make sure not to cut obliquely. Once the material is cut obliquely or cored, it will affect the subsequent material welding process and cause the welder to polish the excess material. Or adding filler materials, or wo...... [Read More]

Sawing performance of titanium and titanium alloys Titanium is an allotrope with a melting point of 1720°C. When it is lower than 882°C, it has a close-packed hexagonal lattice structure, which is called α titanium alloy; when it is above 882°C, it has a body-centered cubic lattice structure, ...... [Read More]