Due to the advantages of good cutting accuracy and efficiency, good material utilization, and wide application range, sawing machines are more and more widely used. In order to ensure the cutting accuracy of the machine tool, the machine tool deflects the band saw blade at an angle of 45° in p...... [Read More]

With the development of science and technology, metal band sawing machines have been widely used in the production and processing industry. Generally speaking, the operation of metal band sawing machines is inseparable from the lubrication system. The specific reasons are as follows: The lubri...... [Read More]

During the entire cutting process of the sawing machine, what users do not want is that the section of the product after cutting is rough, because this will increase the time and cost of post-processing, so in the procurement process, some customers are in the consultation process. It is clear...... [Read More]

In terms of the use of the band sawing machine, how to extend the life of the band sawing machine by using the sawing machine. Improving the operating power of sawing machines has always been the goal of many customers who use sawing machines, but how to solve this problem? As a sawing machine...... [Read More]

Whether the sawing workpiece is leveled when the metal band sawing machine is working. Set whether the distance between the guide arm of the sawing machine and the workpiece is too large. Check whether the band saw blade is dull and needs to be replaced. Check whether the gap between the alloy...... [Read More]

When the user finds that the band saw blade of the metal band saw is seriously cracked, first check the location and extent of the damage, whether it is in the groove position or from the back of the saw blade. Failure of the driving wheel and the driven wheel: the driving wheel deviates from ...... [Read More]

1. The operation and maintenance personnel of metal band sawing machine must receive professional training and master the operation and maintenance skills of metal band sawing machine. Operators shall ensure adequate sleep and keep focused. 2. When changing speed, you must stop first and then ...... [Read More]

The hydraulic transmission system is a hydraulic circuit composed of pump, valve, oil cylinder, oil tank, pipeline and other auxiliary components, which completes the lifting of saw beam and the clamping of workpiece under electrical control. Stepless speed regulation of feed speed can be impl...... [Read More]

Maintenance of metal band sawing machine when not in use 1. Check the position of the chip cleaning brush on the band sawing machine, keep the tooth groove and iron filings removed, adjust or replace the chip cleaning brush if necessary, and check the excessive wear of the chip cleaning steel ...... [Read More]

The service life and cutting speed of the saw blade of the band sawing machine are mainly determined by the quality of the band sawing machine. When the band saw is in good condition, the cutting of the band saw will be: smoother, straighter, faster. 1. Look at the main driven wheel of the ban...... [Read More]