Reported by: ANTISHICNC Date: May 13, 2022
How to improve the life and operation efficiency of sawing machines, band sawing machines and CNC sawing machines during use? The following is a brief explanation from Shanghai ANTS: 1.Purchase of band sawing machine and saw blade The selection of sawing machines and saw blades will play a gu...... [Read More]
Reported by: ANTISHICNC Date: May 12, 2022
When the CNC band saw machine in the sawing process, the sawing machine control failure, may be the ac contactor core reset weak spring force is small, no longer position, can be replaced coil; Another possibility is that the sawing machine voltage is low, the iron core does not move, this tim...... [Read More]
Reported by: ANTISHICNC Date: May 11, 2022
In the manufacturing process of ANTISHI CNC machine tool parts, a large amount of time is spent on non-cutting time such as tool replacement, loading and unloading, measuring and handling parts, and the cutting processing time accounts for the entire work time. smaller proportion of time. In o...... [Read More]
Reported by: ANTISHICNC Date:
A brief description of the working principle of the band sawing machine For the cutting industry, sawing machines, band sawing machines, and metal band sawing machines play an important role: 1.Hydraulic transmission system. It is a hydraulic circuit composed of pumps, valves, oil cylinders, ...... [Read More]
Reported by: ANTISHICNC Date:
The assembly of the rocker arm and the column of the radial drilling machine When assembling and adjusting the rocker arm and the column of the radial drilling machine, the following aspects should be paid attention to: 1.The side with the key way of the outer column should be turned to the s...... [Read More]
Reported by: ANTISHICNC Date: May 10, 2022
Hardened steel usually refers to the workpiece material with martensitic structure after quenching, high hardness, high strength, and almost no plasticity. When the hardness of hardened steel is >55HRC, its strength sb is about 2100-2600N/mm2. Usually, the workpiece has been roughed before ...... [Read More]
Reported by: ANTISHICNC Date: May 9, 2022
Hard turning clean material for lathe and its selection Coated carbide Coated carbide cutting tools are coated with one or more layers of TiN, TiCN, TiAlN and Al2O3 with good wear resistance on the tough carbide cutting tools. The thickness of the coating is 2~18µm. The layer usuall...... [Read More]
Reported by: ANTISHICNC Date:
The CNC milling machine is developed on the basis of the general milling machine. The processing technology of the two is basically the same, and the structure is also somewhat similar. However, CNC milling machines rely on program control to automatically process machine tools, so their struc...... [Read More]
Reported by: ANTISHICNC Date: May 8, 2022
The quality of the Metal Circular Saw is very important. The poor quality of the Circular Saw will directly affect the normal use in the later period. However, if the quality is good, the service life of the Circular Saw will be greatly shortened without paying attention to maintenance. Regula...... [Read More]
Reported by: ANTISHICNC Date: May 7, 2022
The maintenance of the metal circular saw is very important. Regular maintenance can prolong the service life of the metal circular saw and maintain normal working conditions. The maintenance of the metal circular saw needs to pay attention to the following three points: 1. Before using the me...... [Read More]
