Reported by: ANTISHICNC Date: October 9, 2022
1.The machine body is used to fix and support all parts of the milling machine. There are horizontal guides on the top surface for moving the cross member. The front wall is equipped with dovetail-shaped vertical guides for the lifting platform to move up and down. Main motor, spindle transmis...... [Read More]
Reported by: ANTISHICNC Date: October 8, 2022
1.A reasonable distance must be maintained between the tool electrode and the workpiece electrode. Within this distance range, it can not only meet the requirements that the pulse voltage continuously breaks down the medium to generate spark discharge, but also meet the requirements of medium ...... [Read More]
Reported by: ANTISHICNC Date: October 7, 2022
Compare machine layouts The two guide rails of the flatbed CNC lathe are parallel to the ground plane. The planes of the two guide rails intersect with the plane of the ground to form an inclined plane with angles of 30°, 45°, 60° and 75°. From the side of the machine tool, the flat bed CNC l...... [Read More]
Reported by: ANTISHICNC Date: October 6, 2022
Usually, the rotation of the boring tool is the main movement, and the movement of the boring tool or workpiece is the feed movement.It is mainly used for machining high-precision holes or positioning multiple holes at once to complete the finishing, in addition, it can also be engaged in othe...... [Read More]
Reported by: ANTISHICNC Date: October 5, 2022
Definition： A radial drilling machine is a kind of drilling machine where the radial arm can rotate and lift around the column, and the headstock usually moves horizontally on the radial arm.When machining holes on a vertical drilling machine, the alignment of the tool and the workpiece is ac...... [Read More]
Reported by: ANTISHICNC Date: October 4, 2022
Metal band sawing machines are mainly used for low alloy steel, high alloy steel, special alloy steel and stainless steel. Main categories According to the structure, it is divided into horizontal metal band sawing machine and vertical metal band sawing machine, and horizontal is divided into...... [Read More]
Reported by: ANTISHICNC Date: October 3, 2022
Machining center For ANTISHICNC, the definition is very simple: a vertical machining center is a vertical CNC milling machine with a tool magazine. The vertical machining center is a machine tool with simple machinery and complex electrical appliances, as well as a machine tool with simple str...... [Read More]
Reported by: ANTISHICNC Date: October 2, 2022
The maintenance of the band saw machine should pay attention to the following points: 1. Sawdust, resin and dust on the machine should be cleaned frequently, and the saw wheel, saw blade and sliding parts should be kept clean; 2. Check the electrical devices, such as the operation of the motor...... [Read More]
Reported by: ANTISHICNC Date: October 1, 2022
Pipe thread lathe, also known as pipe threading lathe machine, is a horizontal lathe specially designed for turning large-diameter pipe fittings. In order to facilitate the clamping and processing of large-diameter pipe fittings or rods, this product is widely used in mechanical processing op...... [Read More]
Reported by: ANTISHICNC Date: September 30, 2022
Vertical machining center refers to the machining center with the spindle axis and the workbench set vertically. It is mainly used to process complex parts such as plates, discs, molds and small shells. The vertical machining center can complete milling, boring, drilling, tapping and thread c...... [Read More]
