Reported by: ANTISHICNC Date: July 22, 2021
1. Different parts processing methods C6140: The lathe machine is equipped with a four-station automatic feed mechanical stop device in the longitudinal direction. The length of the workpiece can be set by adjusting the longitudinal position of the cam on the stop lever to realize the longitud...... [Read More]
Reported by: ANTISHICNC Date:
1. Ordinary lathe bed Bed: It is the basic part of the lathe, which is used to support and install the various parts of the lathe to ensure their relative position, such as the bedside box, feed box, slide box, etc. The bed has sufficient rigidity and strength, and the surface accuracy of the ...... [Read More]
Reported by: ANTISHICNC Date:
In the naming method of the lathe, 6 is the number of the lathe, you can see that the number of the ordinary car is generally C6136.C6140.C6150. The last two digits refer to the maximum working diameter of the lathe. For example, the maximum working diameter of C6136 is 360 mm, the working dia...... [Read More]
Reported by: ANTISHICNC Date: July 15, 2021
Application Vertical lifting table milling machines with working table widths of 250, 300, 360mm are suitable for milling of various metals. They can mill planes, bevels, formed surfaces, grooves, keyways, install special tool holders and accessories, and can also drill, Boring, etc. The machi...... [Read More]
Reported by: ANTISHICNC Date: July 14, 2021
Bending is a process of folding and bending flat panels. It follows the cutting process in the entire processing chain. The workpiece is placed on a die with a V-shaped opening. The wedge cutter (upper knife) presses the workpiece into the V-shaped opening and in this way bends the sheet to th...... [Read More]
Reported by: ANTISHICNC Date: July 13, 2021
Turret Milling Machine is also called Rocker arm universal milling machine Products Feature: 1.Our milling machines has passed the strict CE certification and had already got the CE certificate. Our factory also get the ISO certificate. 2.Our universal turret milling machine are widely used fo...... [Read More]
Reported by: ANTISHICNC Date:
Cutting steel on the sawing machine can cut blanks with larger cross-sections. Although sawing has low productivity and large saw blade loss, the lengthwise dimension is accurate, and the cut end surface is flat and perpendicular to the axis line. Therefore, forgings with higher quality requir...... [Read More]
Reported by: ANTISHICNC Date:
A milling machine usually consists of seven parts. The bed is used to install and support all the parts of the machine tool. It is the main body of the milling machine, which contains a main drive assembly, gearbox, and electrical box. The bed is installed on the base. The base is the base of ...... [Read More]
Reported by: ANTISHICNC Date:
1. Before work, carefully check whether the grid voltage, oil pump, lubrication, and oil volume are normal, whether the pressure of the gown, cooling, oil pipes, cutters, and fixtures are intact, and perform regular maintenance of the machine tool. 2. After the machine is energized and started...... [Read More]
Reported by: ANTISHICNC Date:
The automatic sawing machine consists of a metal band saw bed, inner and outer worktables, saw frame, guide device, movement mechanism, feed system components, electrical system components, workpiece clamping device, band saw blade tensioning device, and bearing The material rack, lubrication ...... [Read More]
