Reported by: ANTISHICNC Date: September 15, 2021
1. Cleaning: disassemble and clean the oil scraper of each part; Wipe each sliding surface and guide rail surface, wipe the workbench and transverse, lifting screw rod, wipe the tool feeder and tool holder. 2. Lubrication: keep all oil holes clean and unblocked and fill 32# lubricating oil; Fi...... [Read More]
Reported by: ANTISHICNC Date:
1. Operator Because they operate machines and control other variables. 2. Number of teeth on the work piece Too few teeth will pull the teeth and cause the teeth to fall (the three-tooth principle). Too many teeth will increase the load on the cogging and cause tooth loss. Most materials: at l...... [Read More]
Reported by: ANTISHICNC Date:
1. Longitudinal grinding method Longitudinal grinding method is a common grinding method. During grinding, the worktable is fed longitudinally and repeatedly, the grinding wheel acts as periodic transverse feed, and the grinding allowance of the workpiece is ground off in multiple reciprocatin...... [Read More]
Reported by: ANTISHICNC Date: September 9, 2021
Safe operation and strict compliance matters 1. When operating the sawing machine, it is forbidden to wear gloves and loose clothing. So as not to make the body involved in the machine, causing danger. 2. After fully confirming irrelevant persons and obstacles around the machine, it can be sta...... [Read More]
Reported by: ANTISHICNC Date:
The workpiece is always cut diagonally, which is a common problem in band saw blade cutting. There are many factors involved. Some people blame the band saw blade supplier. In fact, the sawing of the workpiece involves not only the skill of the operator, but also the adjustment of the sawing m...... [Read More]
Reported by: ANTISHICNC Date:
Fx-12s centerless cylindrical grinder mainly has six grinding methods: round bar through grinding, short round workpiece through grinding, multi-stage forming grinding, attachment workpiece stop grinding, taper stop grinding and cross workpiece grinding. The following focuses on three methods...... [Read More]
Reported by: ANTISHICNC Date:
The machine tool is a machine for manufacturing machines, also known as machine tools, mainly including lathes, milling machines, planers, drilling machines, boring machines, grinders, sawing machines, etc. The machine tool manufacturing industry provides a variety of machinery and equipment f...... [Read More]
Reported by: ANTISHICNC Date:
As a metal cutting machine tool, metal band saws are widely used in the machining industry. Whether it is profiles, pipes or solid materials, metal band saws are good at sawing. As the main equipment for sawing materials, the scientific selection and use of band saws are directly related to th...... [Read More]
Reported by: ANTISHICNC Date:
The sawing machine is generally a machine tool that cuts some materials such as saw blades or processes them into the shape required by the customer. Its most fundamental nature is the nature of a machine tool, and the original sawing machine has low processing accuracy, and is generally used ...... [Read More]
Reported by: ANTISHICNC Date:
1、 The hydraulic oil on the sawing machine shall be sufficient, and the sliding and rotating parts shall be coated with a layer of engine oil. 2、 Install the saw band on the band sawing machine, adjust the tensioning device (rotate the left handle of the saw frame) to tighten the saw band to...... [Read More]
