Reported by: ANTISHICNC Date: September 15, 2021
1. Three jaw chuck is also called three jaw self centering chuck. It determines the rotation center of the workpiece according to the circumference of the workpiece clamping part, but its centering accuracy is not very high. Generally, according to the application occasion, when finishing turn...... [Read More]
Reported by: ANTISHICNC Date:
The material of the bimetal band saw blade is mainly formed by welding electron beam (or laser) , using the tooth part and the back part. Band saw blade tooth material: In the initial stage, the bimetallic band saw blade material was M2 and M4. It was gradually eliminated because of its softne...... [Read More]
Reported by: ANTISHICNC Date:
1. Longitudinal grinding method Longitudinal grinding method is a common grinding method. During grinding, the worktable is fed longitudinally and repeatedly, the grinding wheel acts as periodic transverse feed, and the grinding allowance of the workpiece is ground off in multiple reciprocatin...... [Read More]
Reported by: ANTISHICNC Date:
Centerless grinder has high productivity and is easy to realize automation after adding various loading and unloading devices. It is mostly used in mass production and can be operated by unskilled workers. The grinding accuracy of centerless grinder is generally: roundness of 2 microns, dimens...... [Read More]
Reported by: ANTISHICNC Date:
1. Cleaning: disassemble and clean the oil scraper of each part; Wipe each sliding surface and guide rail surface, wipe the workbench and transverse, lifting screw rod, wipe the tool feeder and tool holder. 2. Lubrication: keep all oil holes clean and unblocked and fill 32# lubricating oil; Fi...... [Read More]
Reported by: ANTISHICNC Date:
1. Operator Because they operate machines and control other variables. 2. Number of teeth on the work piece Too few teeth will pull the teeth and cause the teeth to fall (the three-tooth principle). Too many teeth will increase the load on the cogging and cause tooth loss. Most materials: at l...... [Read More]
Reported by: ANTISHICNC Date:
1. Longitudinal grinding method Longitudinal grinding method is a common grinding method. During grinding, the worktable is fed longitudinally and repeatedly, the grinding wheel acts as periodic transverse feed, and the grinding allowance of the workpiece is ground off in multiple reciprocatin...... [Read More]
Reported by: ANTISHICNC Date: September 9, 2021
Safe operation and strict compliance matters 1. When operating the sawing machine, it is forbidden to wear gloves and loose clothing. So as not to make the body involved in the machine, causing danger. 2. After fully confirming irrelevant persons and obstacles around the machine, it can be sta...... [Read More]
Reported by: ANTISHICNC Date:
The workpiece is always cut diagonally, which is a common problem in band saw blade cutting. There are many factors involved. Some people blame the band saw blade supplier. In fact, the sawing of the workpiece involves not only the skill of the operator, but also the adjustment of the sawing m...... [Read More]
Reported by: ANTISHICNC Date:
Fx-12s centerless cylindrical grinder mainly has six grinding methods: round bar through grinding, short round workpiece through grinding, multi-stage forming grinding, attachment workpiece stop grinding, taper stop grinding and cross workpiece grinding. The following focuses on three methods...... [Read More]
