1. Before operation, wear tight-fitting protective clothing, with cuffs fastened, and the hem of the jacket cannot be opened. It is strictly forbidden to wear gloves, and it is not allowed to wear, take off, or wrap around the body next to the operating machine tool to prevent the machine from being twisted. You must wear a safety helmet, braids should be put in the hat, and no skirts or slippers are allowed.
2. Make all preparations before starting the machine, and install the vise so that the sawing center is in the middle of the sawing stroke. The raw material is placed horizontally on the vise, at right angles to the saw blade; if you want to saw the oblique angle material, first adjust the vise to the required angle, and the sawing size should not be larger than the maximum sawing size of the machine tool.
3. Make all preparations before starting the machine, and install the vise so that the sawing center is in the middle of the sawing stroke. The raw material is placed horizontally on the vise, at right angles to the saw blade; if you want to saw the oblique angle material, first adjust the vise to the required angle, and the sawing size should not be larger than the maximum sawing size of the machine tool.
4. When the material is about to be sawn off, strengthen observation and pay attention to safe operation.
5. After the work is finished, cut off the power supply, put the control handles back to the empty positions, and do a good job of cleaning.
6. If a malfunction is found during the operation of the machine tool, it should be stopped immediately and reported to the Ministry of Construction and Security to send a mechanic to repair it.
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.