1. When the rocker drill is processed, it is necessary to match the spindle taper hole with the drill taper handle, and it is best to grind the taper hole with a special one. 2. The spindle sleeve of the radial drilling machine and the box guide shaft sleeve are back nut on the shaft to ensure...... [Read More]

Generally speaking, grinding can be divided into ordinary grinding, high-speed grinding and ultra-high-speed grinding according to the linear speed of the grinding wheel; according to the grinding precision, grinding can be divided into ordinary grinding, precision grinding and ultra-precision...... [Read More]

The advantages of cutting fluid are mild and non-toxic, controllable concentration ratio, easy operation, and only warm water or alkaline cleaning agent can remove the residual liquid. In addition, the cutting fluid also has the function of preventing chip buildup and rust prevention. If the c...... [Read More]

Cutting heat, sawing vibration and wear are the three primary factors leading to premature damage and failure of band saw blade. All three will shorten the service life of the band saw blade, resulting in unnecessary cost waste, and users have to spend more on purchasing new saw blades. Avoidi...... [Read More]

Cutting fluids can be divided into oil-based cutting fluids and water-based cutting fluids. The lubricating effect of oil-based cutting fluid is good, while the cooling effect of water-based cutting fluid is more outstanding. Water based cutting fluid is generally composed of emulsion, semi sy...... [Read More]

1) Install the saw blade correctly: loosen the locking screw, tighten the saw blade clockwise (only with your hands, not with the lever), and tighten the saw blade (the saw blade is pulled too loosely, or it may fall off), and then tighten the two M10 The sawing machine can only be started aft...... [Read More]

The internal leakage of the oil pump of the metal band saw is caused by the internal leakage: the volumetric efficiency of the worn internal leakage of the gear pump decreases, and the output power of the oil pump is much lower than the input power. All its losses are converted into heat energ...... [Read More]

We usually need some safety precautions when operating band saws. Now let me explain to you: 1. The main belt wheel guard, belt pulley guard, band saw blade guard, work bed, etc. of the sawing machine are all safety guards, and should be used correctly during operation. Before operating the ba...... [Read More]

1.High processing capacity and productivity. 2. The saw blade can be flexibly adjusted on the shaft through the hydraulic waiting mechanism to process wood of different specifications 3. The circular saw has high sawing precision and good surface quality 4. The circular saw has long service li...... [Read More]

1. The selection of high-quality band sawing machine and correct operation and adjustment of band sawing machine are the most important factors to ensure the service life of band sawing blade. Good rigidity and working performance of the band saw machine can prevent the great impact of vibrati...... [Read More]