Reported by: ANTISHICNC Date: July 14, 2021
Bending is a process of folding and bending flat panels. It follows the cutting process in the entire processing chain. The workpiece is placed on a die with a V-shaped opening. The wedge cutter (upper knife) presses the workpiece into the V-shaped opening and in this way bends the sheet to th...... [Read More]
Reported by: ANTISHICNC Date: July 13, 2021
Turret Milling Machine is also called Rocker arm universal milling machine Products Feature: 1.Our milling machines has passed the strict CE certification and had already got the CE certificate. Our factory also get the ISO certificate. 2.Our universal turret milling machine are widely used fo...... [Read More]
Reported by: ANTISHICNC Date:
Cutting steel on the sawing machine can cut blanks with larger cross-sections. Although sawing has low productivity and large saw blade loss, the lengthwise dimension is accurate, and the cut end surface is flat and perpendicular to the axis line. Therefore, forgings with higher quality requir...... [Read More]
Reported by: ANTISHICNC Date:
A milling machine usually consists of seven parts. The bed is used to install and support all the parts of the machine tool. It is the main body of the milling machine, which contains a main drive assembly, gearbox, and electrical box. The bed is installed on the base. The base is the base of ...... [Read More]
Reported by: ANTISHICNC Date:
1. Before work, carefully check whether the grid voltage, oil pump, lubrication, and oil volume are normal, whether the pressure of the gown, cooling, oil pipes, cutters, and fixtures are intact, and perform regular maintenance of the machine tool. 2. After the machine is energized and started...... [Read More]
Reported by: ANTISHICNC Date:
The automatic sawing machine consists of a metal band saw bed, inner and outer worktables, saw frame, guide device, movement mechanism, feed system components, electrical system components, workpiece clamping device, band saw blade tensioning device, and bearing The material rack, lubrication ...... [Read More]
Reported by: ANTISHICNC Date: July 12, 2021
On the CNC lathe, four standard threads of metric, inch, modulus and diameter control can be turned. No matter which thread is turned, a strict movement relationship between the lathe spindle and the tool must be maintained: that is, one revolution of the spindle (That is, the workpiece rotate...... [Read More]
Reported by: ANTISHICNC Date:
Cyclone milling machines are divided into four general categories (40, 50, 63, 80) and various non-standard machine tools. The matching series of whirlwind milling heads all use (imported bearings for whirlwind milling equipment) with better cutting accuracy and stronger rigidity than the orig...... [Read More]
Reported by: ANTISHICNC Date:
The CNC whirlwind milling machine not only has high production efficiency, but also because it does not use difficult-to-handle cutting fluid, the “comma”-shaped chips are easy to recycle, and the environmental pollution of the production plant is much lower than that of general mi...... [Read More]
Reported by: ANTISHICNC Date: July 10, 2021
Product Description: Milling machines are tools used by engineers and machine creators to cut metal into a specific shape. A turret milling machine is a vertical mill, meaning the spindle — the area that performs the cuts — is positioned vertically. The turret milling machine is considered a v...... [Read More]
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.