Reported by: ANTISHICNC Date: June 4, 2021
The gantry machining center is different from the vertical machining center and the horizontal machining center. Its main characteristics are its large volume and long processing stroke. The installation based on this guide rail is not unimportant. At present, the gantry type CNC machine tool ...... [Read More]
Reported by: ANTISHICNC Date: June 3, 2021
1. Selection of the processed object Before deciding what to buy, you must first clarify what you are going to process. Generally speaking, parts with the following characteristics are suitable for processing in machining centers: Multi-process intensive workpieces refer to a workpiece that re...... [Read More]
Reported by: ANTISHICNC Date:
There are not many introduction materials on surface grinder grinding steps. It should be noted that the steps can be ground from two directions, and the basis for choosing which side to cut the steps from is efficiency. As shown in the figure below, the same part changes the direction, the gr...... [Read More]
Reported by: ANTISHICNC Date:
Compared with lathes, milling machines, etc., surface grinders adopt numerical control systems later because of its special requirements for numerical control systems. In the past ten years, with the help of CNC technology, continuous dressing of grinding wheels, automatic compensation, automa...... [Read More]
Reported by: ANTISHICNC Date:
The surface grinder mainly uses the grinding wheel to rotate and grind the workpiece to achieve the required flatness. According to the shape of the worktable, it can be divided into two types: rectangular worktable and round worktable. The main parameters of the rectangular worktable surface ...... [Read More]
Reported by: ANTISHICNC Date: May 31, 2021
Why is the production efficiency of the same drilling machine several times different? The conclusion is that the selected fixture of the CNC drilling machine is not suitable, which greatly reduces the production efficiency of the CNC machine tool. The following introduces the reasonable selec...... [Read More]
Reported by: ANTISHICNC Date:
Radial drilling machine is a kind of precision manufacturing equipment. Therefore, the accuracy of radial drilling is directly related to the vital interests of the downstream customers of the machine tool. If the radial drilling machine of the parts manufacturer has a problem, a large number ...... [Read More]
Reported by: ANTISHICNC Date:
The slotting machine is actually a vertical planer, which belongs to the same category as the bullhead planer in terms of structure. The linear reciprocating motion of the inserting knife in the vertical direction with the ram is the main motion, and the intermittent motion of the workpiece in...... [Read More]
Reported by: ANTISHICNC Date:
Vertical drill can be described as an all-round drilling machine. In addition to the functions of ordinary drilling machines, it also has multiple functions such as reaming, reaming, boring, and tapping. The work efficiency is 3 to 5 times that of ordinary drilling machines. It is widely used....... [Read More]
Reported by: ANTISHICNC Date:
Vertical drill is a small drilling equipment, which is used to drill small and medium-sized parts. Generally, the processing range is below 25MM. The height is generally below 1.5 meters. Most of the height is 1 meter. More work on the work surface, more power transmission It is a belt drive m...... [Read More]
