Compare machine layouts The two guide rails of the flatbed CNC lathe are parallel to the ground plane. The planes of the two guide rails intersect with the plane of the ground to form an inclined plane with angles of 30°, 45°, 60° and 75°. From the side of the machine tool, the flat bed CNC l...... [Read More]

Usually, the rotation of the boring tool is the main movement, and the movement of the boring tool or workpiece is the feed movement.It is mainly used for machining high-precision holes or positioning multiple holes at once to complete the finishing, in addition, it can also be engaged in othe...... [Read More]

Definition： A radial drilling machine is a kind of drilling machine where the radial arm can rotate and lift around the column, and the headstock usually moves horizontally on the radial arm.When machining holes on a vertical drilling machine, the alignment of the tool and the workpiece is ac...... [Read More]

Metal band sawing machines are mainly used for low alloy steel, high alloy steel, special alloy steel and stainless steel. Main categories According to the structure, it is divided into horizontal metal band sawing machine and vertical metal band sawing machine, and horizontal is divided into...... [Read More]

Machining center For ANTISHICNC, the definition is very simple: a vertical machining center is a vertical CNC milling machine with a tool magazine. The vertical machining center is a machine tool with simple machinery and complex electrical appliances, as well as a machine tool with simple str...... [Read More]

The maintenance of the band saw machine should pay attention to the following points: 1. Sawdust, resin and dust on the machine should be cleaned frequently, and the saw wheel, saw blade and sliding parts should be kept clean; 2. Check the electrical devices, such as the operation of the motor...... [Read More]

Pipe thread lathe, also known as pipe threading lathe machine, is a horizontal lathe specially designed for turning large-diameter pipe fittings. In order to facilitate the clamping and processing of large-diameter pipe fittings or rods, this product is widely used in mechanical processing op...... [Read More]

Vertical machining center refers to the machining center with the spindle axis and the workbench set vertically. It is mainly used to process complex parts such as plates, discs, molds and small shells. The vertical machining center can complete milling, boring, drilling, tapping and thread c...... [Read More]

With the development of science and technology, machining centers have become the main force of processing, and more and more machining centers have become necessary equipment for production. The machining centers are not affected by human beings, the processing consistency is good, the labor...... [Read More]

In today’s machining field, CNC lathes have been widely used in various fields. The use of numerical control lathe can avoid problems such as insufficient structural rigidity, poor seismic resistance and large friction resistance of sliding surface. It is also helpful to improve turning ...... [Read More]