Reported by: ANTISHICNC Date: October 22, 2022
The grinding problems of centerless grinder are as follows: 1. The workpiece roundness of centerless grinder is out of tolerance and the grinding wheel is not sharp. The characteristics of the workpiece and the rule of accuracy change should be mastered and the grinding wheel should be trimmed...... [Read More]
Reported by: ANTISHICNC Date: October 21, 2022
Bench drilling machine is referred to as bench drilling machine, which refers to a small drilling machine that can be placed on the workbench and the main shaft is arranged vertically. The drilling diameter of the bench-top drilling machine is generally less than 13 mm, generally not more than...... [Read More]
Reported by: ANTISHICNC Date: October 20, 2022
The plane of the two guide rails of the CNC lathe is parallel to the ground plane. The plane of the two guide rails of the CNC lathe with inclined bed intersects with the ground plane, forming an inclined plane with angles of 30°, 45°, 60°, and 75°. From the side of the machine tool, the bed o...... [Read More]
Reported by: ANTISHICNC Date: October 19, 2022
The principle of micro-EDM is not fundamentally different from that of ordinary EDM. The surface quality of its machining mainly depends on the size and depth of the etch pits, that is, the energy of a single discharge pulse; and its machining accuracy is closely related to factors such as the...... [Read More]
Reported by: ANTISHICNC Date: October 18, 2022
After using the radial drilling machine for a period of time, some minor faults may occur, which will cause the drilling machine to be unable to operate normally and delay the normal production, and point out some common faults and maintenance solutions during the use of the drilling machine. ...... [Read More]
Reported by: ANTISHICNC Date: October 17, 2022
Introduction Machine tool guide soft belt is a kind of PTFE-based nano-polymer composite material, which is a high-end guide soft belt product for various precision machine tools, CNC equipment and machining centers with high precision requirements. It is rich in solid lubricant particles and ...... [Read More]
Reported by: ANTISHICNC Date: October 16, 2022
Due to the large market demand for wire cutting machine tools, the quality of wire cutting machine tools on the market is also mixed. The wire cutting machine tool is the last process in the mold processing, and it is also an important step, so the processing accuracy must meet the requirement...... [Read More]
Reported by: ANTISHICNC Date: October 15, 2022
1. Different processing functions 1）. Gantry milling machine: Multiple milling cutters can be used on the gantry milling machine to process the surface at the same time, and the machining accuracy and production efficiency are relatively high. 2）. Gantry machining centers: there are fixed be...... [Read More]
Reported by: ANTISHICNC Date: October 14, 2022
The technical requirements of the bench drill spindle sleeve are mainly divided into two parts, namely, the design principle of the external shape and size and the technical requirements for the selection of part materials. The material selection of the spindle sleeve of the drilling machine a...... [Read More]
Reported by: ANTISHICNC Date: October 13, 2022
All models of Antsmachine spark machines are installed and equipped with light-sensing and temperature-sensing alarm reminder devices. If the temperature exceeds the limit or the red light and warm light exceeds the limit, these alarm functions will be triggered, and the automatic fire extingu...... [Read More]
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.