Any mechanical equipment will have some “small problems” after being used for a long time, but if these “small problems” are not handled in time, the service life of the machine will be affected after a long time. So is the electric spark machine. But how to extend the ...... [Read More]

The worktable of high-speed wire rail CNC vertical lathe needs to bear the workpiece and drive it to run together. Its bearing capacity and rotary accuracy undoubtedly affect the machining effect of the workpiece, and the support bearing under the worktable is the key to achieve all this. The ...... [Read More]

What is Swiss-type Automatic Lathe and Knife Machine? Both Swiss-type automatic lathe and CNC cutting machine belong to CNC horizontal lathe. The traditional CNC lathe is mainly based on the cutting mode, which is called the cutting lathe. The single clamping position of the product remains un...... [Read More]

CNC precision automatic lathe — the full name of the walking CNC lathe, can also be called Swiss-type automatic lathe, the economical turning and milling compound machine tool or the slitting lathe. It belongs to precision machining equipment, which can complete compound processing such ...... [Read More]

Line rail high-speed CNC vertical lathe is the abbreviation of digital program-controlled lathe. It integrates the characteristics of a lathe with good versatility, a fine lathe with high processing accuracy, and a special-purpose ordinary lathe with high processing efficiency. of a machine to...... [Read More]

The grinding problems of centerless grinder are as follows: 1. The workpiece roundness of centerless grinder is out of tolerance and the grinding wheel is not sharp. The characteristics of the workpiece and the rule of accuracy change should be mastered and the grinding wheel should be trimmed...... [Read More]

Bench drilling machine is referred to as bench drilling machine, which refers to a small drilling machine that can be placed on the workbench and the main shaft is arranged vertically. The drilling diameter of the bench-top drilling machine is generally less than 13 mm, generally not more than...... [Read More]

The plane of the two guide rails of the CNC lathe is parallel to the ground plane. The plane of the two guide rails of the CNC lathe with inclined bed intersects with the ground plane, forming an inclined plane with angles of 30°, 45°, 60°, and 75°. From the side of the machine tool, the bed o...... [Read More]

The principle of micro-EDM is not fundamentally different from that of ordinary EDM. The surface quality of its machining mainly depends on the size and depth of the etch pits, that is, the energy of a single discharge pulse; and its machining accuracy is closely related to factors such as the...... [Read More]

After using the radial drilling machine for a period of time, some minor faults may occur, which will cause the drilling machine to be unable to operate normally and delay the normal production, and point out some common faults and maintenance solutions during the use of the drilling machine. ...... [Read More]