1. Check the position of the chip cleaning brush on the band sawing machine, keep the tooth groove and iron filings removed, adjust or replace the chip cleaning brush if necessary, and check the excessive wear of the chip cleaning steel brush. 2. Check the position of the oil gauge of the gear...... [Read More]

1、 Install the band sawing machine with the saw blade, and adjust the device to make the saw blade reach the accurate working state; The hydraulic oil on the band sawing machine needs to be full. If it is not full, add 32, add hydraulic oil to the high filter, and wipe the rotating and slidin...... [Read More]

The main performance characteristics： 1. Extremely rigid dual-column cast -iron construction with heavy swivel console 2. Three cutting speeds -directly shifted via main drive motor . 3. Infinitely variable saw frame feed . 4. Horizontal saw frame swivels up to 45 ° . 5. Saw frame automatical...... [Read More]

Item Model:  GZ4232 Cutting Capacity/mm  Φ300 / W320*H320 Blade speed/M/min  30/50/80 (Invertor optional) Blade size/mm  W34*T1.1*L4115                                  Blade drive Motor           Hyd.Pump Coolant pump  3.0(4P)KW 0.75KW 0.04KW   Clamping method  Hydraulic vice  ...... [Read More]

The Feature of G4240 Hydraulic vice clamping . Scientific structure of direction guide to improve the blade lifetime. Can customized manufacture automatic and hydraulic tensioning saw blade. Dual Oil cylinder controlled with stable feeding . Mechanical feeding roller and receiving roller . Can...... [Read More]

(1) Selection of PCBN tools PCBN tools often do not show good cutting performance when processing medium-hard materials. For example, when processing medium and low-hardness workpieces, PCBN tool life is not as long as that of cemented carbide. The tool only starts when processing workpieces w...... [Read More]

1 Introduction The bell-shaped shell is a series of products produced for supporting the steering gear of automobiles and forklifts. The shape of the shell varies greatly and the size varies greatly. There are shank and without shank; there are ball and cylindrical heads; the diameter range of...... [Read More]

Wiper (wiper blade) turning blade 1.Overview of Wiper (wiper) turning blades Using Wiper (wiper) turning blades, the feed rate can be doubled, while the surface quality remains the same. Wiper (wiper) is shown in Figure 3-9 . 2.Comparison of the machining effect of Wiper (wiper) turning inser...... [Read More]

1. Preface In the high-precision, high-quality, and high-efficiency processing of parts and components, measurement technology plays a very important role. Due to differences in the blanks, it is difficult to rely on the machine tool itself to control the machining accuracy. Real-time measurem...... [Read More]

How does superstring finishing technology improve finishing efficiency? The purpose of CNC finishing is to ensure the final dimensional accuracy and surface quality of the workpiece. The surface quality of finishing depends largely on the height of the residual ridge left after processing. Th...... [Read More]