Reported by: ANTISHICNC Date: November 1, 2021
The vertical slide of the circular sawing machine advances and retracts the knife up and down, with stable feed, long tool life and high cutting accuracy. Multi-group gear transmission is suitable for heavy cutting with stable accuracy. The feeding system is carefully designed, and the feeding...... [Read More]
Reported by: ANTISHICNC Date:
A centerless grinder is a type of grinder that does not require the positioning of the axis of the workpiece to perform grinding. It is mainly composed of three mechanisms: a grinding wheel, an adjusting wheel and a workpiece support. The grinding wheel actually performs the grinding work, an...... [Read More]
Reported by: ANTISHICNC Date:
The internal grinder is mainly used to grind the surface and end surface of the inner hole formed by the cylindrical, conical or other shapes. Grinding machine for processing the inner hole surface and the end surface of the cylindrical, conical or other shapes of the workpiece. Internal grind...... [Read More]
Reported by: ANTISHICNC Date: October 29, 2021
Cylindrical grinders are divided into ordinary cylindrical grinders and cylindrical grinders. On ordinary cylindrical grinders, the outer cylindrical surface and outer conical surface of the workpiece can be ground, and the cylindrical grinder can also grind the inner cylindrical surface, inne...... [Read More]
Reported by: ANTISHICNC Date:
Surface grinder is a kind of grinder. The grinding wheel is mainly used to rotate and grind the workpiece to achieve the required flatness. According to the shape of the table, it can be divided into two types: rectangular table and round table. The main parameters of the rectangular table su...... [Read More]
Reported by: ANTISHICNC Date:
1. Install a new grinding wheel and lightly hit it with a wooden hammer, and start it only after there is no noise. The operator stands by the side of the machine and can only be used after an empty test run for ten minutes without deflection or shaking. 2. When the grinding wheel approaches t...... [Read More]
Reported by: ANTISHICNC Date:
The saw bow equipped with the saw blade makes reciprocating motion and feeds by the saw frame swinging around a single point. The machine tool has a simple structure, small volume, but low efficiency. The trajectory of the saw blade of the hack saw machine has two kinds of linear and arc. When...... [Read More]
Reported by: ANTISHICNC Date: October 28, 2021
As with any machine tool, there are many safety guidelines that must be followed when operating a centerless grinder. Whether you are a novice or an experienced centerless grinder operator, you should have the following basic safety knowledge. The first is to fully understand how to correctly...... [Read More]
Reported by: ANTISHICNC Date:
Machine bed/machine bed The base is a sturdy heavy cast iron structure that supports the other parts of the machine. It contains the hydraulic oil tank and the grinding wheel head assembly. Tip: A machine with a solid base will increase the rigidity of the machine and reduce vibration. Swivel...... [Read More]
Reported by: ANTISHICNC Date:
Distinguish between Truing and Dressing Truing and dressing are generally considered to be the same process, and sometimes they are used interchangeably when discussing the terms of shaping or dressing procedures. This may be because, with the exception of some resin bond or metal bond produc...... [Read More]
