FIND THE RIGHT MACHINE FOR YOU
Reported by: ANTISHICNC Date: September 29, 2021
Band Saw Machine for Metal Used 1 The cut-off time of the machine is 4 to5 times that of hack sawing machine 2 The saw kerfs is 2mm narrower than of hack sawing machine.. 3 Hydraulic feeding, step less speed regulation. 4 Hydraulic claming, automatic stopping. 5 Simple and convenient operation...... [Read More]
Reported by: ANTISHICNC Date: September 28, 2021
Brief Introduction 1). Taiwan brand spindle unit, with high speed, precision and rigidity 2). X/Y/Z axes adopt high precision, reinforced, large pitch ball screws, ensures high feedrate 3). servo motor delivers power to ball screws directly, ensures excellent positioning accuracy 4). X/Y/Z ax...... [Read More]
Reported by: ANTISHICNC Date:
Product Name Conprofe High Precision Ultrasonic Machining Center Work table Dimension 620×560 Max.Load 300 Travels Max.Travel in X-/Y-/Z-axis 600x500x300mm FeedRate Rapid Traverse in X-/Y-/Z-axis 15/15/12m/min Spindle Diameter 120mm Power Ra...... [Read More]
Reported by: ANTISHICNC Date:
Feature: 1. Robust construction for efficient machining. 2. Boxway rail or Linear rail as optional. 3. Armless (Umbrella)Type ATC (16-20 tools) Or Mechnical Hand ATC ( 24 tools) 4. The rotary table ( 4th axis) as optional. 5. Integrated coolant system. 6. Chip conveyor and purge system for opt...... [Read More]
Reported by: ANTISHICNC Date:
1. The operation and maintenance personnel of metal band sawing machine must receive professional training and master the operation and maintenance skills of metal band sawing machine. Operators shall ensure adequate sleep and keep focused. 2. When changing speed, you must stop first and then ...... [Read More]
Reported by: ANTISHICNC Date:
1. Check the position of the chip cleaning brush on the band sawing machine, keep the tooth groove and iron filings removed, adjust or replace the chip cleaning brush if necessary, and check the excessive wear of the chip cleaning steel brush. 2. Check the position of the oil gauge of the gear...... [Read More]
Reported by: ANTISHICNC Date:
1、 Install the band sawing machine with the saw blade, and adjust the device to make the saw blade reach the accurate working state; The hydraulic oil on the band sawing machine needs to be full. If it is not full, add 32, add hydraulic oil to the high filter, and wipe the rotating and slidin...... [Read More]
Reported by: ANTISHICNC Date:
The main performance characteristics： 1. Extremely rigid dual-column cast -iron construction with heavy swivel console 2. Three cutting speeds -directly shifted via main drive motor . 3. Infinitely variable saw frame feed . 4. Horizontal saw frame swivels up to 45 ° . 5. Saw frame automatical...... [Read More]
Reported by: ANTISHICNC Date:
Item Model: GZ4232 Cutting Capacity/mm Φ300 / W320*H320 Blade speed/M/min 30/50/80 (Invertor optional) Blade size/mm W34*T1.1*L4115 Blade drive Motor Hyd.Pump Coolant pump 3.0(4P)KW 0.75KW 0.04KW Clamping method Hydraulic vice ...... [Read More]
Reported by: ANTISHICNC Date:
The Feature of G4240 Hydraulic vice clamping . Scientific structure of direction guide to improve the blade lifetime. Can customized manufacture automatic and hydraulic tensioning saw blade. Dual Oil cylinder controlled with stable feeding . Mechanical feeding roller and receiving roller . Can...... [Read More]
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.