| Main Features: |
| Wheel head with high rigid spindle, high rotary precision & rigidity. |
| Work Head should adopt a frequency converter to realize Step-Less speed regulation. |
| Universal work can be adjusted at any angle within 90 degrees counterclockwise to adapt the Chuck. |
TECHNICAL SPECIFICATION
| Outside grinding dia (OD) | Min: Maxm 8, Max: Minm 320 mm |
| Outside grinding length | 1500mm |
| Inside grinding depth | 125 mm |
| Inside grinding dia (ID) | Min: Maxm 30, Max: Minm 150 mm |
| Max. Length Ground (ID) | 125 mm |
| Max. Weight of Work Piece | 150 kg |
| Work Head Swiveling Angle | ±90° |
| Work Head Center Taper | MT4 |
| Work Head Spindle Speed / Stepless | 26-260 rpm, 50 Hz |
| Wheel Head Spindle Speed | 1670 rpm |
| Max. Dimension of Wheel (ODxWxID) | 400x50x203mm |
| Wheel Head Swiveling Angle | ±10° |
| Wheel Head Hand Feed Per Rev | 2 Fine 0.5 |
| Wheel Head Hand Feed Per Gra 0.0025 | 0.01mm (Fine) – 0.0025 |
| Wheel Head Peripheral Velocity | 35 m/s |
| Internal Grinding Device Spindle Speed | 10000 rpm |
| Internal Grinding Dimension of Wheel | Max. 50x25x13 mm and Min. 17x20x6 mm |
| Table Hand Feed Per Rev. | 6mm |
| Max. Swiveling Angle of Table | 3° |
| Max. Swiveling Angle of Table | 8° |
| Longitudinal Speed Range of Table | Min: Maxm 0.1, Max: Minm 4 m/min |
| Tailstock Center Taper | MT 4 |
| Tailstock Quill Travel | 30 mm |