Wiper (wiper blade) turning blade
1.Overview of Wiper (wiper) turning blades Using Wiper (wiper) turning blades, the feed rate can be doubled, while the surface quality remains the same. Wiper (wiper) is shown in Figure 3-9 .
2.Comparison of the machining effect of Wiper (wiper) turning inserts and traditional ISO turning inserts Under the same cutting parameters, the comparison of the surface quality obtained after the processing of Wiper (wiper) turning inserts and traditional ISO turning inserts is shown in Figure 3- 10 shown.
3. The general principles of using Wiper wiper blades to obtain high surface quality The general principles of using Wiper wiper blades to obtain high surface quality are as follows:
(1) The surface quality can usually be improved by using a higher cutting speed.
(2) The blade geometry (negative and positive rake angle) affects the surface quality.
(3) The choice of blade grade has less influence on the surface quality.
(4) If there is a tendency of vibration, choose a turning insert with a smaller nose radius to improve the processing conditions.
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.