technology news

Countermeasures for low efficiency when sawing with a band saw

In terms of the use of the band sawing machine, how to extend the life of the band sawing machine by using the sawing machine. Improving the operating power of sawing machines has always been the goal of many customers who use sawing machines, but how to solve this problem? As a sawing machine factory, I will tell you how to improve the operating power of the sawing machine. Regarding the power of the sawing machine, on the one hand, it is whether the operator can operate well. The operation has a great influence on the power. A good operator can make the sawing machine reach a good working condition, and the working power can also be very good. Make progress quickly. On the other hand, it is the problem of sawing machine and saw blade, the performance of sawing machine and the selection of saw blade. Therefore, in terms of improving the power of the sawing machine, the following methods can be basically followed:

1. The training of the sawing machine operator is very important. Only by understanding the various properties of the sawing machine in detail can the sawing machine be operated well. Correctly operating and adjusting the machine tool is the most important factor to ensure the service life of the band saw blade.

2. For the purchase of sawing machines and saw blades, use high-quality band sawing machines. Good machine rigidity and working performance can prevent the huge impact of vibration and various stresses on the band saw blade. And choose the right band saw blade you will be using. According to the material to be cut, select the appropriate saw blade width, tooth shape and pitch.

3. Correctly use the sawing parameters of the sawing machine, which mainly include the linear speed of the saw belt, the feed rate, and the tension of the saw belt. The ideal chip when sawing material should be tight-rolled, silvery and have a warm feel. If there is sintering, brownish blue, hypertrophy or powdery chips, it is necessary to adjust the relevant parameters. The correct use of cutting fluid and its mixture can lubricate and cool the band saw blade and clean the attachments on the saw teeth in time.

4. Correctly “run-in” the new band saw blade. Regarding the use of the new saw blade, “run-in” is very important. Correct operation can effectively prolong the service life of the band saw blade. “Break-in” is to remove the burrs on the tooth edges through the natural wear of the saw teeth, so that the band saw blade gradually enters the normal sawing state, so as to avoid prematurely causing the chipping and curling of the saw teeth, especially the profiles, pipes and special-shaped materials with rapid cross-section changes. is particularly important.

If you want to know more about ANTS, please visit our official website.
Our website:

If you have any other questions, please contact us directly by email.
Our eail:

(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)

Get The Required Product Quotation As Quickly As Possible

If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.

have any queries? Send to

Contact Us