The maintenance of the metal circular saw is very important. Regular maintenance can prolong the service life of the metal circular saw and maintain normal working conditions. The maintenance of the metal circular saw needs to pay attention to the following three points:
1. Before using the metal circular saw, check the oil amount of the lubricating oil to ensure that the oil amount is appropriate and the oil circuit unblocked. Check whether the parts of the circular saw are intact to ensure the safety and reliability of the device. Check whether the power line is in a normal power-on state.
2. If abnormal noise is found during the use of the metal circular saw, stop it in time and check it, always pay attention to the operation of the motor and electrical appliances, temperature rise, sound, vibration, etc., so as to avoid the metal circular saw machine working under load.
3. After the work of the metal circular saw machine is over, first put the operating handles in neutral, reset, and switch the gear to the neutral position. When all the operating devices are in the neutral state, disconnect the power switch. Then clean the work site, keep the working environment clean and tidy, wipe the outer parts of the metal circular saw to prevent dust from entering the interior of the circular saw.
As customers’ requirements for products are getting higher and higher, and more and more attention is paid to precision, metal circular saws came into being. The cutting accuracy of the metal circular saw machine is higher than that of the band saw machine, because the metal circular saw machine uses a circular saw blade for cutting, while the band saw machine uses a band saw blade for cutting. .
The single cutting speed of the metal circular saw is also higher than that of the band saw. The difference is that the band saw can cut several materials at the same time, while the metal circular saw can only perform single cutting, so the overall cutting speed of the two is similar. big.
The surface of the metal material cut by the metal circular saw is very smooth and has no burrs. After cutting, it can be directly taken to the next process for processing. However, the surface of the metal material cut by the band saw is uneven and needs to be smoothed before processing.
From the point of view of saving material cost and time cost, metal circular saw machine is more suitable for the current market demand. When making choices, enterprises should also consider their own needs from multiple perspectives and select the most suitable sawing equipment for production.