At present, under the technological development and progress of turret milling machines, many manufacturing industries can use turret milling machines to process and produce workpieces. At the same time, turret milling machines continue to be improved in space structure technology and technology, so the frequency of use is gradually increasing. More and more. The work efficiency of the turret milling machine will be faster and faster, and the operation efficiency will be higher and higher.
There are several differences between a rocker milling machine and a turret milling machine.
1. The general radial arm milling machine and the turret milling machine have different structure methods
The operating table of the all-round rocker milling machine has an inverted mechanism, and the operating table can be rotated by ±45°, which increases the scope of processing and production. The turret milling machine cannot be reversed and can only move in a Z-shape. The method is relatively simple.
2. There is no difference between the transmission method of the universal radial arm milling machine and the turret milling machine. The main shaft of the universal radial arm milling machine is driven by gears, and the output power is larger. When adjusting the milling speed of the turret, not only the gear needs to be adjusted, but also when the gear is set and then stopped, it is necessary to manually adjust the pulley to stop the adjustment.
3. There is no difference between the structural strength of the universal rocker milling machine and the turret milling machine. The general rocker arm structure is more stable than the control structure and has a larger load bearing component. Some turntables have been added to the foundation of the entire casting structure. It is heavy and large; the output of the milling head adopts the mod-type structure, and the output force is large; the output of the turret milling machine adopts the taper shank output, the load is limited, and the weight is relatively light.
4. The universal radial arm milling machine and the turret milling machine have different types of parts. Due to the large output power, the universal radial arm milling machine can process stainless steel, cast iron, cast steel and other ferrous metals in addition to aluminum and copper parts; Behind the wheel, you can process worm gears and so on. Turret milling machine can only process aluminum and copper parts with low cutting force.
SHANGHAI ANTS MACHINE EQUIPMENT CO.,LTD.
Website:www.antsmachine.com
Get The Required Product Quotation As Quickly As Possible
If possible, Given detailed request helps to gain better-matched customized solution. Thanks for your patience. your request will be responsed within 1 hours, kindly pay attention to your email please.